【2022年】十大PLC課程熱門排行推薦與優惠精選!

 

本文章推薦「PLC Fundamentals (Level I)」、「Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & Delta」、「From Wire to PLC , A Bootcamp In Industrial Automation」等相關PLC線上課程,讓您滿足學習的慾望。

你是否想透過線上學習得到更多的技能,增加自己的技能樹?現在是學生的您,透過線上學習可以將更多專業知識用在課業學習上更加強所學。還是您是朝九晚五的上班族,尋找可以為工作上帶來更上一層樓的技能?或您是因為興趣或想培養其他興趣?

線上課程不受地理位置影響,不受時間早晚影響,老師來自世界各地,也不受學習程度影響的特色,讓您無時無刻想學都可以,想多看幾次增加熟悉度也可以。不同領域的老師將針對不同主題滿足您的學習目的,推薦的課程項目會陸續更新,絕對提供您最熱門人氣高的線上課程。

  • 線上課程老師來自於全球,文章推薦的熱門課程除了繁中課程以外還會有機會看到簡中和英文課程,可以針對自己喜好挑選。
  • 呈現的價錢會因為一些活動而有折扣,但折扣有可能一段時間後結束而調整回原價,最終價錢煩請到課程頁面進行確認。





PLC課程總覽

為了節省您的時間,本列表整理每個課程精要,讓您可以快速瀏覽這文章所提供的課程是否是您所需要的,點選您有興趣課程的「課程名稱」或「課程圖示」可以進一步跳到文章所屬課程的介紹區塊瞭解更多資訊。

課程名稱PLC Fundamentals (Level I)Applied Logic (Level 2)Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & DeltaProcess Visualization (Level 3)From Wire to PLC , A Bootcamp In Industrial AutomationIEC Paradigms (Level 4)TIA Portal Master Project (Level 5)PLC Programming – Training from Scratch on RSLogix500 & 5000Factory Automation using PLC LogicsAllen Bradley PLC Training – RSLogix 5000 Series
課程圖示
1

PLC Fundamentals (Level I)

2

Applied Logic (Level 2)

3

Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & Delta

4

Process Visualization (Level 3)

5

From Wire to PLC , A Bootcamp In Industrial Automation

6

IEC Paradigms (Level 4)

7

TIA Portal Master Project (Level 5)

8

PLC Programming - Training from Scratch on RSLogix500 & 5000

9

Factory Automation using PLC Logics

10

Allen Bradley PLC Training - RSLogix 5000 Series

課程原價NT$ 2,690NT$ 2,690NT$ 1,790NT$ 1,790NT$ 2,690NT$ 1,790NT$ 1,790NT$ 2,790NT$ 1,790NT$ 2,790
課程售價NT$ 590NT$ 590NT$ 470NT$ 590NT$ 470NT$ 590NT$ 590NT$ 470NT$ 470NT$ 1,390
課程評價(人數)4.6 分(17,178 個評分)4.7 分(2,952 個評分)4.5 分(3,898 個評分)4.9 分(1,778 個評分)4.7 分(3,360 個評分)4.8 分(859 個評分)4.5 分(2,178 個評分)4.4 分(1,483 個評分)4.5 分(574 個評分)4.3 分(798 個評分)
課程時長10 小時8 小時26 小時17 小時17 小時16 小時29 小時14.5 小時6.5 小時21.5 小時
學生人數53,341 人23,764 人19,193 人16,347 人12,876 人11,153 人8,461 人6,302 人4,236 人3,010 人
課程特色This course will give a person with no prior experience the basic tools necessary to create a PLC program from scratch.This course will give an intermediate-level student the experience necessary to originate complex, logical solutions.PLC Programming of Allen Bradley, Delta, Siemens, Omron & Schneider using LIVE Examples with HMI InterfacingLearn HMI / SCADA hands-on by developing your own live interfaces for a running system.Build Electrical Automation Projects From Sctratch. Starting From Wires , Control Circuits And Ending With PLC And HMIFunctional Block Diagrams, Sequential Function Charts, Instruction Lists, Ladder Diagrams and Structured TextLearn (hands-on) to create complete PLC and HMI solutions from absolute zero in TIA Portal.PLC programming from scratch training class by a controls engineer equipped with PLC systems – Allen Bradley RSLogix 500Interactive 3D platform to build and simulate Industrial Automation systemThis course will give a person with no experience learn PLC programming from scratch using RSLogix 5000 and Studio 5000.
連結UdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemy



PLC課程介紹

推薦的課程以倒序的方式呈現,越往下查看會看到越熱門的,期望您能找到滿意的學習主題!

10

Allen Bradley PLC Training – RSLogix 5000 Series

This course will give a person with no experience learn PLC programming from scratch using RSLogix 5000 and Studio 5000.
NT$ 2,790
NT$ 1,390

點擊看Udemy

課程老師Shane Welcher
課程評價4.3 分(798 個評分)
課程時長21.5 小時
學生人數3,010 人

課程介紹

This course is designed to give you a deep understanding of the core values needed to be able to program, troubleshoot, and have the deepest knowledge of Rockwell Automation PLC controls with RSlogix 5000 or Studio 5000. This course starts from scrat

瞭解更多細節

哪些人適合這堂課?

  • Anyone looking to learn the complete setup and PLC controls in the RSLogix 5000 or Studio 5000 software
  • Example: May have some knowledge of PLCs but is looking to find out the details and the tricks of the trade.

學習目標

  • Be able to completely setup and program a basic Rockwell Automation in RSLogix 5000 and Studio 5000 from scratch, from beginning to end, all the way to understanding PLC programming. This course will provide all you need to know to use Rockwell Automation PLC programming to be able to programming in RSLogix 5000 or Studio 5000 with over 20 hours of detailed video training, knowledge that you can’t get just anywhere!

關注這課程的人也購買了這些…

9

Factory Automation using PLC Logics

Interactive 3D platform to build and simulate Industrial Automation system
NT$ 1,790
NT$ 470

點擊看Udemy

課程老師Rajvir Singh
課程評價4.5 分(574 個評分)
課程時長6.5 小時
學生人數4,236 人

課程介紹

This course has been created for the users who wants quick learning on real time industrial application like Sorting, Packaging, We have used high end software like FACTORY I/O and CONTROL I/O to explain PLC Logics.

Factory I/O is the world’s first

瞭解更多細節

哪些人適合這堂課?

  • Mechatronics Engineers
  • Electrical/ Electronics Engineers
  • Instrumentation Technician
  • Engineering Students

學習目標

  • To learn how to build Industrial Automation System as per the application
  • Learn mechanics of installing sensors and actuators in machine
  • Simulating your industrial system with PLC Logics
  • Testing and analyzing feasibility of the project.

關注這課程的人也購買了這些…



8

PLC Programming – Training from Scratch on RSLogix500 & 5000

PLC programming from scratch training class by a controls engineer equipped with PLC systems – Allen Bradley RSLogix 500
NT$ 2,790
NT$ 470

點擊看Udemy

課程老師Vladimir Romanov
課程評價4.4 分(1,483 個評分)
課程時長14.5 小時
學生人數6,302 人

課程介紹

In this class, you will learn absolutely everything necessary to land a job as an entry level PLC technician (engineer, etc.).

We will cover basic topics such as what a PLC is used for, how it is able to receive and process Inputs & Outputs. We will

瞭解更多細節

哪些人適合這堂課?

  • Electrical Engineers
  • Electricians
  • Technicians
  • Anyone interested in learning how an industrial process works

學習目標

  • Understand how a Programmable Logic Controller (PLC) works
  • Understand how to programm a PLC
  • Showcase several completed projects to an employer
  • Pass a technical PLC interview

關注這課程的人也購買了這些…

7

TIA Portal Master Project (Level 5)

Learn (hands-on) to create complete PLC and HMI solutions from absolute zero in TIA Portal.
NT$ 1,790
NT$ 590

點擊看Udemy

課程老師Paul Lynn
課程評價4.5 分(2,178 個評分)
課程時長29 小時
學生人數8,461 人

課程介紹

By now, you already know the basics. You know what digital and analog signals are. You know what “PLC” and “HMI” mean. You know what an INT and a BOOL and a FLOAT are. As long as you’re at LEAST that far, you’ll be able to handle this course. If you

瞭解更多細節

哪些人適合這堂課?

  • This course is perfect for anybody wanting to learn PLC / HMI development using the latest Siemens development platform(s).

學習目標

  • By the end of this course, you will be able to program Siemens PLCs using ALL of the IEC programming languages supported in TIA Portal.
  • You will know how to create complete HMI projects using WinCC RT Professional.
  • At your next interview, you’ll be able to bring your laptop with a fully functional PLC program and HMI both running live to actually demonstrate everything you’ve learned in this course (which will be quite a lot).

關注這課程的人也購買了這些…



6

IEC Paradigms (Level 4)

Functional Block Diagrams, Sequential Function Charts, Instruction Lists, Ladder Diagrams and Structured Text
NT$ 1,790
NT$ 590

點擊看Udemy

課程老師Paul Lynn
課程評價4.8 分(859 個評分)
課程時長16 小時
學生人數11,153 人

課程介紹

You already know how to program a PLC and make it do what you want using Ladder Diagrams (only ten dollars on PLC Dojo). But as you are undoubtedly aware, there are several other “paradigms” (programming languages) out there to create logic, and you

瞭解更多細節

哪些人適合這堂課?

  • This course is a follow-up to “PLC Programming from Scratch (PLC I)” and builds upon the knowledge and techniques imparted in that course with NO reviews or primers.
  • If you have not already completed my course titled “PLC Programming from Scratch (PLC I)”, you are probably NOT ready for this one. If you have taken it but you’ve forgotten anything, it would behoove you to go back through it before taking this course.
  • PLC II and PLC III are NOT prerequisites for this course.

學習目標

  • By the end of this course, students will be able to program nearly ANY modern PLC regardless of mfg.
  • Students will be knowledgeable AND experienced with all five IEC programming paradigms.
  • Students will know how to lay out a complex PLC program

關注這課程的人也購買了這些…

5

From Wire to PLC , A Bootcamp In Industrial Automation

Build Electrical Automation Projects From Sctratch. Starting From Wires , Control Circuits And Ending With PLC And HMI
NT$ 2,690
NT$ 470

點擊看Udemy

課程老師Mouhammad Hamsho
課程評價4.7 分(3,360 個評分)
課程時長17 小時
學生人數12,876 人

課程介紹

***Update 11/17/2020**

**** Allen Bradley Training was added***

***Update 11/28/2018**

**** Classic control simulation software tutorial is available***

***Update 14/11/2018***

One-Line diagram interpretation section was added

****Update 29/10/

瞭解更多細節

哪些人適合這堂課?

  • Electrical and Electronics Engineers
  • Control Eningineers
  • Computer Engineers
  • Industrial Engineeres
  • Anybody willing to learn a new profession from scratch
  • Anybody enthused about factory automation design

學習目標

  • Design Factories Automation from A to Z
  • Design Automation Electrical Panels
  • Draw Schematics for Electrical panels
  • Calculation of cable sizes for any project
  • Design Motor driving control circuits
  • Get knowledge and hands on experience in using VFD
  • Learn to program PLC in Ladder Diagram (LD)
  • Learn to program PLC in Fucntional Blocks (FB)
  • Learn to program PLC in Structured Text (ST)
  • Learn to program PLC in Continuous Flow Chart (CFC)
  • Design Human User Interface (HMI)
  • Design protection for electrical panel
  • Learn about the different sensors exist in indusrty

關注這課程的人也購買了這些…



4

Process Visualization (Level 3)

Learn HMI / SCADA hands-on by developing your own live interfaces for a running system.
NT$ 1,790
NT$ 590

點擊看Udemy

課程老師Paul Lynn
課程評價4.9 分(1,778 個評分)
課程時長17 小時
學生人數16,347 人

課程介紹

As a PLC programmer, there are two sides of the coin that you MUST know to get the job done, and those are the PLC and the HMI.  In my first two PLC courses (only ten dollars each on PLC Dojo), you learned the ins and outs of PLC and have already cre

瞭解更多細節

哪些人適合這堂課?

  • This course requires students to already know the basics of PLC programming. You should already be familiar with RSLogix 500 memory / IO addresses. As we will be developing interfaces against a running instance of a PLC program running live on RSLogix 500 Emulate, you should already be familiar with that software as well as RSLinx and RSLogix 500.
  • For those lacking the requisite knowledge to make the most of this course, my first course “PLC Programming from Scratch (PLC I) covers everything you’ll need and a whole lot more.

學習目標

  • By the end of this course, you will be able to create HMI / SCADA interfaces using various technologies allowing operators to interact with a live, running system.
  • Using the provided PLC program as the basis for our interfaces, you’ll be creating fully-functional graphical interfaces to monitor the process, visualize alarms, provide control and even log periodic and on-demand data storing it into a SQL database.

關注這課程的人也購買了這些…

3

Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & Delta

PLC Programming of Allen Bradley, Delta, Siemens, Omron & Schneider using LIVE Examples with HMI Interfacing
NT$ 1,790
NT$ 470

點擊看Udemy

課程老師Rajvir Singh
課程評價4.5 分(3,898 個評分)
課程時長26 小時
學生人數19,193 人

課程介紹

     Today, PLC is being used in every Process & Manufacturing Industries, besides knowing the Wiring & Connection, one must know how to program a PLC. Unless you know how the brain works, it’s extremely difficult to troubleshoot a process. This cour

瞭解更多細節

哪些人適合這堂課?

  • PLC Programmers
  • Engineers – Production & Maintenance
  • Technicians

學習目標

  • To Learn Ladder Logic Programming
  • PLC Wiring Concepts & Troubleshooting
  • To Teach Programming to Technician & Engineer

關注這課程的人也購買了這些…



2

Applied Logic (Level 2)

This course will give an intermediate-level student the experience necessary to originate complex, logical solutions.
NT$ 2,690
NT$ 590

點擊看Udemy

課程老師Paul Lynn
課程評價4.7 分(2,952 個評分)
課程時長8 小時
學生人數23,764 人

課程介紹

As a PLC programmer, you will usually find yourself working alone, unsupported and with nobody to help you but Google.  Your boss or client will tell you what they need, and the only thing they want to hear from you is, “Here it is.”  And when you de

瞭解更多細節

哪些人適合這堂課?

  • This course is a follow-up to “PLC Programming from Scratch (PLC I)” and builds upon the knowledge and techniques imparted in that course with NO reviews or primers.
  • If you have not already completed my course titled “PLC Programming from Scratch (PLC I)”, you are probably NOT ready for this one. If you have taken it but you’ve forgotten anything, it would behoove you to go back through it before taking this course.
  • This course assumes you already know the basic instruction set of RSLogix 500 and are ready to start programming.

學習目標

  • By the end of this course, you will be both able and practiced at originating complex ladder logic applications.
  • The primary and overall objective of this course is to give an INTERMEDIATE PLC programming student, rigorous, practical experience in creating unguided, original ladder logic.
  • Students will build on the knowledge and understanding of PLC programming they got from “PLC Programming from Scratch” by using those instructions and environments and techniques to create real-world solutions to problems defined throughout this course.
  • Upon completion of this course, students will have the requisite skill set to translate a description of a process into a functioning logical solution.

關注這課程的人也購買了這些…

1

PLC Fundamentals (Level I)

This course will give a person with no prior experience the basic tools necessary to create a PLC program from scratch.
NT$ 2,690
NT$ 590

點擊看Udemy

課程老師Paul Lynn
課程評價4.6 分(17,178 個評分)
課程時長10 小時
學生人數53,341 人

課程介紹

This course (only ten dollars on PLC Dojo) is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. 

Using the Rockw

瞭解更多細節

哪些人適合這堂課?

  • This course is written for anybody who wants to become functional with ladder logic as quickly as possible.

學習目標

  • By the end of this course, you will be able to create a PLC program from scratch.
  • The primary and overall objective of this course is to give a novice an understanding of PLC programming, ladder logic, and the inner workings of a standard HMI (Human-Machine Interface).
  • Students will learn the difference between digital and analog signals and how to bring them into a PLC, process them, and send them back out.
  • Students will be familiarized enough with a sufficient variety of ladder logic instructions to create a complete PLC program from scratch.
  • Students will explore basic, standard controls techniques for things like HOA control, level control, pump control, and (on at least an introductory level) PID control loops.
  • Students will develop an understanding of alarm and notification programming, and the relevant considerations to safety and operator usability.
  • Students will be introduced to HMI development and given a general understanding of how an HMI program works.

關注這課程的人也購買了這些…



PLC課程總覽

看完了一連串課程的介紹後,你是否還想要再一次進行課程總比較呢?

課程名稱PLC Fundamentals (Level I)Applied Logic (Level 2)Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & DeltaProcess Visualization (Level 3)From Wire to PLC , A Bootcamp In Industrial AutomationIEC Paradigms (Level 4)TIA Portal Master Project (Level 5)PLC Programming – Training from Scratch on RSLogix500 & 5000Factory Automation using PLC LogicsAllen Bradley PLC Training – RSLogix 5000 Series
課程圖示
1

PLC Fundamentals (Level I)

2

Applied Logic (Level 2)

3

Learn 5 PLCs in a Day-AB, Siemens, Schneider, Omron & Delta

4

Process Visualization (Level 3)

5

From Wire to PLC , A Bootcamp In Industrial Automation

6

IEC Paradigms (Level 4)

7

TIA Portal Master Project (Level 5)

8

PLC Programming - Training from Scratch on RSLogix500 & 5000

9

Factory Automation using PLC Logics

10

Allen Bradley PLC Training - RSLogix 5000 Series

課程原價NT$ 2,690NT$ 2,690NT$ 1,790NT$ 1,790NT$ 2,690NT$ 1,790NT$ 1,790NT$ 2,790NT$ 1,790NT$ 2,790
課程售價NT$ 590NT$ 590NT$ 470NT$ 590NT$ 470NT$ 590NT$ 590NT$ 470NT$ 470NT$ 1,390
課程評價(人數)4.6 分(17,178 個評分)4.7 分(2,952 個評分)4.5 分(3,898 個評分)4.9 分(1,778 個評分)4.7 分(3,360 個評分)4.8 分(859 個評分)4.5 分(2,178 個評分)4.4 分(1,483 個評分)4.5 分(574 個評分)4.3 分(798 個評分)
課程時長10 小時8 小時26 小時17 小時17 小時16 小時29 小時14.5 小時6.5 小時21.5 小時
學生人數53,341 人23,764 人19,193 人16,347 人12,876 人11,153 人8,461 人6,302 人4,236 人3,010 人
課程特色This course will give a person with no prior experience the basic tools necessary to create a PLC program from scratch.This course will give an intermediate-level student the experience necessary to originate complex, logical solutions.PLC Programming of Allen Bradley, Delta, Siemens, Omron & Schneider using LIVE Examples with HMI InterfacingLearn HMI / SCADA hands-on by developing your own live interfaces for a running system.Build Electrical Automation Projects From Sctratch. Starting From Wires , Control Circuits And Ending With PLC And HMIFunctional Block Diagrams, Sequential Function Charts, Instruction Lists, Ladder Diagrams and Structured TextLearn (hands-on) to create complete PLC and HMI solutions from absolute zero in TIA Portal.PLC programming from scratch training class by a controls engineer equipped with PLC systems – Allen Bradley RSLogix 500Interactive 3D platform to build and simulate Industrial Automation systemThis course will give a person with no experience learn PLC programming from scratch using RSLogix 5000 and Studio 5000.
連結UdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemyUdemy



從老師查找更多課程

以上推薦的課程還沒挑到自己有興趣的嗎?
還是您有熱衷某個老師開的課程呢?
本頁除了提供PLC的課程以外,也列出這些課程所屬的老師的主要資訊頁,您可以從下列選單中了解更多相關介紹或看他們開的其他課程,期望您最終能找到自己想學習的項目。



【2022年】十大PLC課程熱門排行推薦與優惠精選!

參考其他硬體線上課程

除了本文介紹的課程種類以外,想要瞭解硬體領域還有哪些不同類型的課程值得一探究竟嗎?讓您可以從不同面向更紮實的學習,點擊參考以下其他熱門主題文章。絕對提供您最優惠人氣滿檔的課程,歡迎繼續延伸閱讀。


Tagged on:

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *